top of page
BENEFITS
Knowledge of In-place Concrete Strength
Quality Assurance
Gain peace of mind with accurate in-place concrete strength information, especially the development process
Productivity
Validate with temperature-matched concrete samples and proceed to the next activities 30-50% faster.
In-place concrete often achieves strength faster than standard-cured concrete samples due to higher temperatures.
Adopt SmartHub with Confidence
Start with SmartCure for validation before moving to real-time monitoring, reduce testing.
Both SmartCure and Smarthub assess in-place concrete strength, with one method being destructive and the other non-destructive.
HOW TO USE
ConcreteAI System Installation in 10 Minutes
Install sensors for structural concrete
Apply ConcreteAI's Smarthub to collect in-situ temperature in real-time.
Place
Concrete Samples
Test samples are placed in the SmartCure tank.
Sychronised
Curing
Automatically adjusts temperature, replicating the in-place concrete temperature
Test
Concrete Samples
Remove concrete samples, demould, and crush them to obtain strength results
FUNCTIONS
Accurate, Wireless and Real-time
In Compliance with BS 1881:130
Heating & Cooling Systems
An integrated heating and cooling system that can reach temperatures up to 80 degrees and cool down to match the in-place concrete profile automatically.
Dashboard
Easily visualize temperatures at the selected monitoring point on the structure with the curing temperature of the samples anytime and anywhere. Helps with QA/QC and evidence management.
Sensor
Equipped with a calibrated temperature monitoring system that collects real-time curing temperatures and sends them to the cloud every 10 minutes.
Mobile Design
With lockable wheels, the system can be positioned anywhere on the site, preferably in a sheltered area, and easily transported between sites and locations.
COMPARING WITH THE CURRENT SITUATION
Technical Specification
Temperature Range
Room Temperature to 80 °C
Temperature sensor for water bath
Accurate to ±1 °C
Heating & Cooling System
Capable of heating at 10 °C /h. Capable of maintaining temperature of water bath to +/- 2 °C /h when compare with in-situ concrete temperature.
Agitating Device
To ensure even temperature distribution
External Dimensions
800mm (L) x 400mm (W) x 600mm (H)
Cube Mould Capacity
8x 150mm x 150mm cubes
10x 100mm x 100mm cubes
Customisable
Power
2200 W, 220 V, 10 A
Weight
80 kg (without water)
Standard
Complies to BS 1881-130:2013
bottom of page